Callisto_logo

THE CPX200N CONTROL PANEL

is a device that meets the basic requirements for the protection of a small and medium-sized objects. Simple functionality, service and fast installation are the main advantages of our control panel. Small dimensions and modern design of keypad, 7 zones possible to grouping into two partitions make CPX200N one of the best solution on the market.

For more demanding, we created a CALLISTO system that reliably meets the requirements of more complex objects. Both panels support up to 3 keypads, so the alarm can be armed / disarmed from 3 different places. It is important especially in offi ces, service points where there are backdoors or in single-family houses with balcony doors, garages.

With the use of wireless, dedicated detectors, you don’t need to distribute meters of cables. You can in easy way put the detector anywhere. CALLISTO system can be operated via nine 4-button remote controls, which functionality can be freely confi gured. Arm / disarm the system by radio is confi rmed each time by buzzer.

CALLISTO supports up to 16 lines, including 9 wireless. In each of our panel is the ability to divide the inputs into 2 zones. User can assign any number of lines to each zone.

IP transmitters

EX20

EX20 transmitters are modern devices for real time internet data transmission. EX20 transmitters are used mainly as the transfer module from security systems. Devices co-operate with all of the most popular alarm systems.

Transmitters work both with static IP and DHCP. They operate in LAN & WAN, using IEEE 802.3 10Mbps/100Mbps standards.

The possibility of EX20 application is much broader. They can be applied everywhere where there exists a necessity to collect information and send them over distance in real time. Thanks to the intuitive and flexible configuration they may be applied in systems with specific requirements ex. energy consumption measurements, vending machines control systems, meteorological station, elevator systems and many others.

EX20 transmitters are offered independently or in sets with metal casing, AC adapter and accumulator. Support for devices in monitoring station is carried out by Monitoring System Receiver OSM.2007. It is offered in the form of independent receiver ensuring complete transfer reliability thanks to redundancy, which protects receiving system if part of the system is damaged, or as a server software for Windows.

Remote configuration and firmware upgrade
comfortable servicing and time savings

Encryption of transmitted data by AES standard
full data transfer safety

Complex telephone line simulation circuit and DTMF receiving (ContactID, Ademco Express)
flexible co-operation with alarm control panels equipped with a dialer and telephone exchanges of various manufacturers

System event history
evidence up to 5000 events enabling to diagnose of possible problems

Device status monitor
diagnostic mode for the installer

Embedded RS232/RS485 serial interface
co-operation with industrial devices

Reserve server servicing
transmission protection in case of a server damage

Automatic lock of inputs
protection against generating needless costs

GSM transmitters

LX20G-3C

LX20G transmitters are modern microprocessor devices for real time data transmission which can simulate a telephone line (PSTN) with transmission on a GSM voice channel. In case of telephone line (PSTN) failure or after dialing specific prefix number, devices establish voice connection with monitoring station and enable data transmission using Contact ID (DTMF) or SIA (FSK). Also available are other transmission channels – GPRS and SMS.

Thanks to LX20G GPRS Transmitter/GSMDialer/GSM Gateway it is possible to make downloading even, when PSTN network isn’t connected to protected premises. Additionally no PSTN modem is needed at installer site. Data is transmitted over the GPRS network which reduces the cost of transmission. Installer must only have access to the LX20G device via OSM server at monitoring station and have access to the network with incoming traffic from LX20G enabled (public IP address or TCPport redirected in case of public APN orconnection to corporate private APN). Configuring control panel remotely using LX20G is still performed using control’s panel configuration application supplied by control panel manufacturer. Instead of connecting PSTN modem to it, ModemEMU application supplied by EBS is used which translates modem communication format to GPRS transmission with LX20G transmitter. LX20G decodes GPRS dataand translates it to the Bell103 format used bycontrol panel.

 

USER BENEFITS:

– Costs savings: remote technical controls of control panels, remote configuration and service;
– No need to have telephone line;No need to have PSTN modem;
– Possibility to check the proper functioning of the control panel from monitoring station;
– Efficient verification of false alarms;
– Faster response to any irregularities in the operation of control panel;
– Supervision over the work quality of the installer.

 

LX20G features:

Simulation a telephone line (PSTN) on a GSM channel
additional transmission channel increasing data transmission reliability

Communication in GSM voice channel
easy integration with the existing monitoring station infrastructure (MLR2 receivers – ContactID, SIA)

Remote configuration and firmware upgrade
comfortable servicing and time savings

Encryption of transmitted data by AES standard
full data transfer safety

Sending of text messages of any desired content to the 5 defined cellphone numbers
immediate signification of the alarm situations occurrence

Phone input compatible with DTMF standard (ContactID, Ademco Express)
cooperation with alarm control panels equipped with a dialer

System event history
evidence up to 5000 events enabling to diagnose of possible problems

Device status monitor
diagnostic mode for the instalator

Authorization for configuration and steering text messages
protection against unauthorized device access

GSM/GPRS connection control
automatic retrieving of the connection with the monitoring station

Sent text messages quantity control, incoming messages retransmission
supervision over transmission costs

Embedded row interface RS232/RS485
co-operation with industrial devices

Steering via CLIP
costless output connection

Reserve server servicing
transmission protection in case of a server damage

Modem choice between three leading manufacturers
adapting the device to the individual preferences

MAKE AN APPOINTMENT

Make an appointment for live demonstration in our office

© Copyright 2017 A-SAT Pte Ltd